Wheel flow forming machine
Nihon Spindle VW1910E
By Flow-Forming the rim section of aluminum weels, it achieves the improvement of product strength and weight reduction, which is not possible by only turning process.
- Each roller unit has its individual control axis to allow overlapped process for cycle time reduction.
- The axial position of each roller can be easily adjusted with NC program.
- By an optional software, monitoring roller thrust and main spindle motor output are available for cycle time reduction and quality managemant.
|Number of Axis||6|
|Applications||1 piece casting wheel|
|Wheel O.D.||φ14－φ19 inch|
|Main Spindle, max.||800 rpm|
|Thrust of Roller Unit||X-Axis: 98 kN, Z-Axis: 98 kN|
|Stroke of Roller Unit||X-Axis: 205 mm, Z-Axis: 300 mm|
|Thrust of tailstock||98 kN|
|Stroke of tailstock||650 mm|
|Motor capacity of main spindle||200 kW|
|Motor capacity of hydraulic unit||15 kW|
- cast aluminium rims
- cast alumimium wheels