Flow Forming Machines for Transmission parts
Nihon Spindle V300X
Possible to flow form complex shape by single chucking with generationg metal flow positively. Spline forming without machining, hub forming without welding are the most typical process. Also it is possible to control the material thickness of the specified portion partially for weight reduction and material saving.
- Compared with machining, possible to process splines with high speed without chips.
- Process rollers driven by servo motor and ball-screw allows higher positioning accuracy, which is also effective for low maintenance cost and saving energy.
- Processing chamber concept which is completely separated from control unit / drive unit makes it possible to prevent troubles and achieve easier maitenance.
- In order to improve workablility and reduce change-over time, mandrel/roller exchange support systemis available as an option.
|Number of Axis||4|
|Applications||Clutch Case, Various Drive System parts|
|Wheel O.D.||φ300 mm|
|Main Spindle, max.||600 rpm|
|Thrust of Roller Unit||X-Axis: 147 kN, Z-Axis: 147 kN|
|Stroke of Roller Unit||X-Axis: 150 mm, Z-Axis: 200 mm|
|Thrust of tailstock||441 kN|
|Stroke of tailstock||200 mm|
|Motor capacity of main spindle||100 kW|
|Motor capacity of hydraulic unit||37 kW|
- clutch drum with boss
- helical Gaer
- CVT Pulley